Power
POULAN PRO POLE SAW are known for their power and high speed. The PP338T has a 33cc engine which puts out about 1 hp. This puts it in between Troy-Bilt and Husqvarna for power.
When talking about a saw having a lot of power, this has two main benefits: 1) cutting thicker limbs and 2) faster cutting. The PP338T has an 8” bar just as Troy-Bilt does. This is a good size for cutting branches up to about 7”. This is very good for what I’d consider a consumer-grade saw. Only once you step up to a commercial-grade Husqvarna will you be able to cut even thicker limbs.
As far a cutting speed, this saw cuts more quickly than electrics. Small branches in the 2” diameter range are cut through in just a few seconds. This will make quick work of your pruning job if you’re mostly cutting smaller branches.
Ease of Use
Since this is a gas saw, it’s not quite as simple to operate as an electric. You’ll need to combine gasoline and 2-stroke oil, prime the engine with the bulb, and pull-start it.
Once it’s running, it’s pretty easy to operate. A good deal of the total 15 pound weight is in the engine, which is held close to you. This helps balance the saw better than many electric models. A harness is also included to take some of the weight off your arms.
Maintenance and Reliability
This saw picks up dust more than an electric due to the exhaust, so you’ll need to put a little more effort into keeping it clean. Maintenance is pretty easy, and it’s mostly limited to keeping the automatic oiler reservoir filled and keeping the chain sharp and free of damage.
In terms of reliability, the engine on this Poulan is a little more finicky than a Husqvarna. If it’s been a long while since you’ve started it, you might have some problems getting the engine started or keeping it idling. Be sure to check the fuel line, filter, spark plug, and idle speed adjustment if it still won’t start and idle properly.
No comments:
Post a Comment